September 21, 2021The NRGMAX Bucket Treater is a conventional horizontal treater with many improvements over other designs. NRGMAX name was derived form…
August 31, 2021Widely used In the oil & gas industry, pressure vessels are typically designed to isolate and separate the flows of…
May 31, 2021There are typically two types of test separators. “Inlet Well Test Separators and Mobile Test Separators”. Mobile Test separators are…
August 29, 2021An inlet scrubber is a type of air pollution control device used in the oil and gas industry to remove…
August 26, 2021Flare Knock Out Drums (FKOD’s) are designed to be as compact as possible, usually with a small building for the…
August 26, 2021Blending butane in commodities such as crude oil, condensate and gasoline has been successfully employed in North America for many…
June 8, 2021Tanks are an important part of the oilfield process equipment, and are used for a variety of purposes in the…
June 8, 2021Header packages are an important component in the oilfield process equipment industry. They are used to distribute fluid or gas…
June 8, 2021Over time, sand will accumulate in the bottom of the inlet degasser, free water knockout drums, and treaters. This sand…
June 2, 2021Meter skids are primarily used to measure the production of gas on wells that hardly produce any liquids. It measure…
June 1, 2021There are two types of line heaters: Indirect and Direct fired. An Indirect-Fired Line Heater has a firetube immersed in…
June 1, 2021Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL).…