Pressure Vessels & Separators

Oilfield Process Equipment
NRG’s Pressure Vessels & Separators are engineered, designed and fabricated to meet ASME Section V11 Div 1 Standards as well as your stringent specifications

Horizonal Separators

Oilfield Process Equipment
NRG’s Pressure Vessels & Separators are engineered, designed and fabricated to meet ASME Section V11 Div 1 StanA vertical separator is a vessel for the bulk removal of liquids or solids by gravity. Operators prefer to utilize vertical separators over other ...

two-phase vertical separator separates gas from liquids. A three-phase vertical separator separates the gas from oil, and oil from water.dards as well as your stringent specifications

Vertical Separators

Oilfield Process Equipment
NRG’s Pressure Vessels & Separators are engineered, designed and fabricated to meet ASME Section V11 Div 1 StanA vertical separator is a vessel for the bulk removal of liquids or solids by gravity. Operators prefer to utilize vertical separators over other ...

two-phase vertical separator separates gas from liquids. A three-phase vertical separator separates the gas from oil, and oil from water.dards as well as your stringent specifications

Test Separators

Oilfield Process Equipment
Test separators sometimes are equipped with different meters to determine oil, water and gas rates, which are important to diagnose well problems, evaluate ...

Test separators are used on exploration wells where effluent phases may not be known, so they must treat a wide variety of effluents, such as gas, gas condensate,

Flare Knock Out Drums

Oilfield Process Equipment
A flare knockout drum is a vessel in the flare header that is designed to remove and accumulate the liquids that are condensed from the relief ..

The knockout drum removes any liquid droplets that carry over with the gas relief sent to the flare. Most flares require the particle size be reduced to a minimum of 

Typical Separator Package Components

Separators can be either horizontal or vertical. Separators can be classified into two-phase and three-phase separators (commonly called free-water knockout). The two-phase type deals only with oil and gas, while the three-phase type handles oil, water and gas.

Instrumentation

This is the combustion chamber where the fuel and gas premix is ignited.
Contact us

Feul Gas System

Designed to provide a safe combustion area. It consists of the primary mixing of gas and air, as well as a B149.3 control system.

Exhaust Stack

Combustion exhaust exits through the top of the stack, while creating a natural draft system; which is vital for effective combustion.

Optional Components

Equipment and components for pressure vessels

Flanged Fittings or NPT fittings

Degassing

Defoaming

Manways

Promotes water droplet formation
Decreases required retention time

Mist Eliminators

Provides linear oil flow path
Primarily used in Bucket Treaters

Instrumentation

Provides the ability to remove the rag interface layer

Post Weld Heat Treatments

Provides linear oil flow path
Primarily used in Bucket Treaters

Contact Us

Looking for custom components for your pressure vessel?

Contact us today

Pressure Vessel
Separator Quote

Call Us: 1-888-NRG-2442
NRG can inspect and retrofit your existing burners systems to compliance
Request Quote

Surplus Stock

Vessels & Separators

Start your next project with
NRG Process Solutions

Cape Manufacturing
Blue Diamon Design Corporation
WestCan Fabrication Ltd

Oilfield Process Equipment Solutions

SiteBuilderOne | Privacy Policy | Sitemap  
©2022 NRG Process Solutions, All rights reserved.

NRG Process Solutions phone-handsetcross-circle