10’ x 40’ 75psi NRGMAX Treater
Stock Vessel
NRGMAX Packed Treaters. The most popular sizes are 8′ x 30′ and 10′ x 40′ however we have built many custom sizes as per our client requirements.
How it Works:
This treater is highly effective in tight emulsions and lower API application. Similar to the bucket treater, this unit also has an inlet slide. During that process, the majority of the gas is stripped off through the gas dome.
The entrained gas is allowed to break out in the mid-section, which leaves the rear section 100% flooded with oil. The water settles to the bottom of the heated section, while the cleaner, dryer oil rises to the top and spills over the weir. The oil then travels down the NRGMA water valve and disperses evenly into the packed secondary treating section of the vessel. The cleaner, dryer oil will rise to the top and exit out the oil collector pipe.
10’ x 40’ 75psi NRGMAX Treater
New Vessel, built in 2021
Fully Flanged, RT-1
(2) 2.5 MM BTU Firetubes
Profire 2100, CSA B149.3 Compliant
5-6 Weeks to Package
CES 851
Stock Vessel
NRGMAX Packed Treaters. The most popular sizes are 8′ x 30′ and 10′ x 40′ however we have built many custom sizes as per our client requirements.
How it Works:
This treater is highly effective in tight emulsions and lower API application. Similar to the bucket treater, this unit also has an inlet slide. During that process, the majority of the gas is stripped off through the gas dome.
The entrained gas is allowed to break out in the mid-section, which leaves the rear section 100% flooded with oil. The water settles to the bottom of the heated section, while the cleaner, dryer oil rises to the top and spills over the weir. The oil then travels down the NRGMA water valve and disperses evenly into the packed secondary treating section of the vessel. The cleaner, dryer oil will rise to the top and exit out the oil collector pipe.
Additional information
| Job Number | CES 851 |
|---|
Questions?
Questions about this equipment (10’ x 40’ 75psi NRGMAX Treater) or any of our oilfield process equipment?
- ASME "U" Stamp Vessel Manufacturing
- CWD Certified
- Engineering & Design Services
Connect with Us
"*" indicates required fields