Line Heater – 280,000 BTU – NRG 465

1.0 SHELL – Reconditioned
24” OD x 10’-0” Long
C/w 6” OD x 16” Horizontal Expansion Tank
Lineheater Shell Covered with 1 ½” Fiberglass Insulation C/w 0.020 Stucco Embossed Aluminum Cladding

2.0 FIRETUBE – Reconditioned-firetube, stack and flame arrestor
One (1) Firetube “U” Type Fire Tube
280,000 BTU/hr based on Flux Rate of 10,000 BTU per hr. / per sq. ft.
C/w 280,000 BTU Flame Arrestor Burner
C/w Exhaust Stack

3.0 COILS
Built New to Suit
8 Pass coils of 2”
MAWP: 1350 PSIG @ 200ºF
Option for NEW coils is available based on customer’s requirements

4.0 BURNER SYSTEM
NOTE: CSA B149.3 COMPLIANT CONTROLS
Field certification required
As per the new rules for B149.3 field certification must be completed by the owner.
Please forward confirmation to us once this is completed.
If you would like us to complete it, we will provide this service at cost plus 10%.

FABS-100 1 FLAME ARRESTED BURNER SYSTEM
Reconditioned Aluminum Flame Arrestor to fit Firetube
BMS-200 1 PROFIRE 2100
SOV-201/202 2 SOLENOID VALVES
SOV-200/203 2 SOLENOID VALVEs

TSH 200/ 1 TEMPERATURE SENSOR ELECTRIC
TSHH 200 Wika TC-10 Dual Head Thermocouple
PSHH/LL- 2 HIGH & LOW PRESSURE SWITCHES
200/201 Profire Burner System
PCV-200 1 KIMRAY MOTOR VALVE
PSV-201 1 MERCER PRESSURE RELIEF VALVE
LLSD-200 1 KIMRAY LEVEL SWITCH ELECTRIC
PRV-200 1 FISHER MODEL 627R INSTRUMENT GAS REGULATOR
PI-201/202 2 PRESSURE GAUGE

5.0 FUEL GAS SYSTEM (1” NPT OFF SKID SWEET SUPPLY)
V-200 1 8” OD X 30” S/S x 150 psi MAWP FUEL GAS SCRUBBER
Process fuel gas supply.
Alberta Registered Fitting

PSV-200 1 MERCER PRESSURE RELIEF VALVE
Set @ 150 psig
1” NPT inlet x 1” NPT outlet
STD service trim, WCB body
Mounted on fuel gas scrubber
PI-200 1 PRESSURE GAUGE
Liquid fill
2 1/2” dia. face x 1/4”

6.0 INSTRUMENTATION

LG-200 1 PENBERTHY OR EQUAL TUBULAR LEVEL GAUGE
3/4″ OD x 24″ Pyrex Red Line Sight Glass
C/w Gauge Glass Guards
C/w Model N7B Gauge Valves
3/4″ NPT Process and 3/8″ NPT Drain Connections

THF-500 1 WENCO THIEF HATCH
Model TH8-16, 8″ Connection
16 oz Pressure Spring, 0.4oz Vaccumm Spring

TI/TW-101 1 MASTER-TEMP 300 OR EQUAL TEMPERATURE GAUGES
1/2” NPT Back Connection
3” Dial, 2 1/2″ Stem
0 to 250°F Range – Dual Scale
C/w ¾” x ½” NPT Stainless Steel Thermowell

7.0 RECONDITIONING
-Relief valves piped outside
-Piping to skid edge c/w individual connections
-Package is readied or dismantled only to the extent required for shipping
-All piping, instrument tubing and equipment will be adequately supported
-All flange and open ends of piping will be covered for shipment
-All instruments to be vented off skid individually
-Sweet Fuel Gas is 1” Threaded provided off skid @ Max 150 Psig
-Shop UT of Line Heater Shell, Original Preheat Coil, Expansion Tank, and Firetube
-Washout of Aluminum Flame Arrestor
-New Burner Train, Nozzle, and Burner Management System