Line Heater – 2.75 MM BTU Indirect Fired – NRG 761

1.0 SHELL
To be Reconditioned
72” Diameter x 29’-6” Long Shell
c/w 36” x 15’ Expansion Tank

2.0 COILS – Existing
3” CL 1500 RTJ SCH 160 / 3125 PSI
4” CL900 RTJ SCH 160 / 2014 PSI
2” CL600 RFWN SCH.80 / 1132 PSI

Pipe: SA-106B
CA: 0.125”
Design Temp: -20 / 200 F Coil Registered in AB
RT – 100%
Hydro: 1.5X

3.0 FIRETUBE
24″ OD firetube c/w stack
Reconditioned Aluminum Flame Arrestor
c/w Eclipse main and pilot burners.

4.0 FUEL GAS SYSTEM (1” NPT OFF SKID SWEET SUPPLY)
Reconditioned 1 8” OD X 30” S/S x 150 psi MAWP FUEL GAS SCRUBBER
Process fuel gas supply.
Alberta Registered Fitting

MERCER PRESSURE RELIEF VALVE
Set @ 150 psig
1” NPT inlet x 1” NPT outlet
STD service trim, WCB body
Mounted on fuel gas scrubber
PRESSURE GAUGE
Liquid fill
2 1/2” dia. face x 1/4” NPT end connection
0 to 200 psig range, dual Scale

5.0 BURNER SYSTEM Burner is B149.3 compliant. Field certification required.
FLAME ARRESTED BURNER SYSTEM
Reconditioned Rated for 2.7 MM BTU/hr to fit 24” firetube
C/w Millstream M7 3” Nozzle Complete CI Burner
C/w Secondary Control Plate C/w Burner Pilot
BMS-200 1 PROFIRE 2100
Combustion Safety Controller
SOV-201/202 2 SOLENOID VALVES
24 volt, 1” NPT connections
SOV-200/203 2 SOLENOID VALVEs
24 volt, 1/4” NPT connections
TSH 200/ 1 TEMPERATURE SENSOR ELECTRIC
TSHH 200 Wika TC-10 Dual Head Thermocouple
¾” X 1” X 12” Stem 304 stainless steel
PSHH/LL- 2 HIGH & LOW PRESSURE SWITCHES
200/201 Profire Burner System
High Pressure Switch (9 to 35 psi) / Low Pressure Switch (1 to 15 psi)
PCV-200 1 KIMRAY MOTOR VALVE
1400 SMT, 1” NPT Steel body,
½” EQ% SS trim, Minimum fire stop, TCV 205
PSV-201 1 MERCER PRESSURE RELIEF VALVE
Set @ 30 psig
1” NPT inlet x 1” NPT outlet, STD service trim, WCB body
LLSD-200 1 KIMRAY LEVEL SWITCH ELECTRIC
2” NPT connection c/w manual test switch, Sour service
PRV-200 1 FISHER MODEL 627 INSTRUMENT GAS REGULATOR
1” FNPT end connection,
Ductile Iron body construction,3/16” SS orifice, 5 to 20psig Outlet Range
PI-201/202 2 PRESSURE GAUGE
Liquid fill
2 1/2” dia. face x 1/4” NPT end connection
0 to 50 psig range, dual Scale
PRV-200 1 FISHER MODEL 627 INSTRUMENT GAS REGULATOR
1” FNPT end connection, 3/16” orifice
Ductile Iron body construction, 316 SST Orifice @ 5 to 20

6.0 SKID AND BUILDING SPECIFICATION
SKID BASE, 8’ – 2” W X 30’- 0” L
Reconditioned 8’-0” WIDE x 30’ – 0” LONG STRUCTURAL STEEL SKID
10” Wide Flange Main Members 4” Lift Lugs
FOAM PANEL ENCLOSURE
Reconditioned 1 ½” thick fiberglass insulation c/w Aluminum cladding
Foam Panel Instrument enclosure
Access doors cw check chain and Whitcomb latch
2’ – 6” W x 8’ Long Foam Panel Hutch

7.0 MANUAL VALVES

Ball Valves 2000# RP
Needle Valves 6000#, CS, SS trim