Line Heater – 2.75 MM BTU Utility Heater – NRG 763

1.0 SHELL –Reconditioned
72” Diameter x 29’-6” Long Shell
c/w 36” x 15’ Expansion Tank

2.0 COILS – Existing
3” CL 1500 RTJ SCH 160 / 3125 PSI
4” CL900 RTJ SCH 160 / 2014 PSI
2” CL600 RFWN SCH.80 / 1132 PSI
Pipe: SA-106B
CA: 0.125”
Design Temp: -20 / 200 F
Coil Registered in AB
RT – 100%
Hydro: 1.5X

3.0 FIRETUBE
Reconditioned
24″ OD firetube c/w stack
Reconditioned Aluminum Flame Arrestor c/w Eclipse main and pilot burners.

4.0 FUEL GAS SYSTEM (1” NPT OFF SKID SWEET SUPPLY) – Reconditioned
8” OD X 30” S/S x 285 psi MAWP FUEL GAS SCRUBBER
Process fuel gas supply.
Alberta Registered Fitting

PSV-200 1 MERCER PRESSURE RELIEF VALVE
Set @ 150 psig
1” NPT inlet x 1” NPT outlet
STD service trim, WCB body
Mounted on fuel gas scrubber

PI-200 1 PRESSURE GAUGE
Liquid fill
2 1/2” dia. face x 1/4” NPT end connection
0 to 200 psig range, dual Scale

5.0 BURNER SYSTEM Burner is B149.3 compliant. Field certification required.

FABS-100 1 FLAME ARRESTED BURNER SYSTEM
Reconditioned Rated for 3.0 MM BTU/hr to fit 24” firetube
C/w Millstream M7 3” Nozzle Complete CI Burner
C/w Secondary Control Plate C/w Burner Pilot

BMS-200 1 PROFIRE 2100
Combustion Safety Controller

SOV-201/202 2 SOLENOID VALVES
24 volt, 1” NPT connections

SOV-200/203 2 SOLENOID VALVEs
24 volt, 1/4” NPT connections

TSH 200/ 1 TEMPERATURE SENSOR ELECTRIC
TSHH 200 Wika TC-10 Dual Head Thermocouple
¾” X 1” X 12” Stem 304 stainless steel

PSHH/LL- 2 HIGH & LOW PRESSURE SWITCHES
200/201 Profire Burner System
High Pressure Switch (9 to 35 psi)
Low Pressure Switch (1 to 15 psi)

PCV-200 1 KIMRAY MOTOR VALVE
1400 SMT, 1” NPT Steel body,
½” EQ% SS trim
Minimum fire stop, TCV 205

PSV-201 1 MERCER PRESSURE RELIEF VALVE
Set @ 30 psig
1” NPT inlet x 1” NPT outlet
STD service trim, WCB body

LLSD-200 1 KIMRAY LEVEL SWITCH ELECTRIC
2” NPT connection c/w manual test switch
Sour service

PRV-200 1 FISHER MODEL 627 INSTRUMENT GAS REGULATOR
1” FNPT end connection,
Ductile Iron body construction,
3/16” SS orifice
5 to 20psig Outlet Range

PI-201/202 2 PRESSURE GAUGE
Liquid fill
2 1/2” dia. face x 1/4” NPT end connection
0 to 50 psig range, dual Scale

PRV-200 1 FISHER MODEL 627 INSTRUMENT GAS REGULATOR
1” FNPT end connection, 3/16” orifice
Ductile Iron body construction, 316 SST Orifice
@ 5 to 20

6.0 SKID AND BUILDING SPECIFICATION

SK-100 1 SKID BASE, 10’ – 0” W X 16’- 8” L
NEW 10’-0” Wx 16’ – 8” L STRUCTURAL STEEL SKID
10” Wide Flange Main Members
4” Lift Lugs

BH-400 1 FOAM PANEL ENCLOSURE
NEW 1 ½” thick fiberglass insulation c/w Aluminum cladding
Foam Panel Instrument enclosure
2 access doors cw check chain and Whitcomb latch
2’ – 6” W x 8’ Long Foam Panel Hutch

7.0 MANUAL VALVES

Ball Valves 2000# RP
Needle Valves 6000#, CS, SS trim

8.0 MATERIAL SPECIFICATIONS

Threaded Piping

Pipe SA-106B sch 80
Fittings SA-105, 3000#

Instrumentation Fittings

Tubing 3/8” 304SS
Fittings 3/8” Plated Swadgelok

9.0 TESTING

Hydrotesting
Coils will be hydrotested to 1.5 times Maximum Allowable Working Pressure

Radiography
100%

Ultrasonic
No

Magnetic Particle Testing
Firetube Yes

10.0 PAINTING AND COATING SPECIFICATIONS

External Surface Preparation SSPC-SP-3
External Finish One (1) Shop Coat Matte Warm Grey Enamel

11.0 NOTES, EXCEPTIONS & CLARIFICATIONS

• Price subject to change based on customer required coil design
• Price subject to change if NEW COILS are required
• Existing coils to be UT’D and derated if required