Flare Knock Out – 24 BBL- 48″ x 10′ 14.9 psi- NRG 579

Fully Reconditioned – Ready to GO!

1.0 VESSEL

48” ID x 10’- 0” S/S ATMOSPHERIC FLARE KNOCK OUT DRUM
Built Non-Code, MAWP: 14.9psig 24 BBL Total Capacity
Inlet Diverter

VESSEL CONNECTIONS:

N1 Inlet 1 – 6” NPS CL150 RF
N2 Gas Outlet 1 – 6” NPS CL150 RF
N3 PSV 1 – 4” NPS CL150 RF
N4 LSHH 1 – 3” NPS CL150 RF
N5 Drain/Liquid Out 1 – 2” NPS CL150 RF
N6A/B Level Glass 1 – 1.5” NPS CL150 RF
N7 PI 1 – 1.5” NPS CL150 RF

M1 Manway 1 – 24” NPS Shop Built

2.0 INSTRUMENTATION

PENBERTHY OR EQUAL TUBULAR LEVEL GLASS – LG-100
3/4″ OD x 45″ Pyrex Red Line Sight Glass
Gauge Glass Guards
C/w Model N7B Gauge Valves
3/4″ NPT Process and 3/8″ NPT Drain Connections

WIKA OR EQUAL PRESSURE GAUGE – PI-100
Liquid Filled, Stainless Steel
4” Face
Bottom Mount ½” NPT Process Connection
0-15psig Range, Dual Scale

3.0 SKID BASE, 7’- 0” W X 12’- 0” L
Main Skid Members – C6 x 8.2#/ft
Vessel Support Members – C6 x 8.2#/ft
Floor Supports – C4 x 5.4#/ft
3/16” Checker Plate under building only
Four (4) Lifting Points, Containment Lip Around Load Out

FOAM PANEL BUILDING
7’-0” Wide x 12’-0” Long x 5’-4” Low Eave Height
Shed Style Roof
1 ½” Galvalume Foam Panel R-12 Insulation Rating
One (1) 6’-0” x 6’-0” Foam Panel Door c/w, Check Chain, Barrel Bolt and Whitcomb Latch, and Weather-Stripping
One (1) 12” x 12” Adjustable Louvers c/w Screen

CATADYNE 12” x 24” MK BUILDING HEATERS
Sweet Natural Gas
12 VDC Starting Element with 30’ Cables
C/w Grill, Vent Hood, Safety Shutoff, 912 Regulator, Maxitrol Regulator and Thermostat

4.0 MANUAL VALVES

1 – ½” NPT 2000# Ball Valve, RP, WCB Body
2 – 3/4” NPT 2000# Ball Valve, RP, WCB Body – Level Glass
1 – 2” 2000# NPT Ball Valve, RP, WCB Body – Load Out
1 ½” – 3000# Needle Valve, NPT, MxF, Carbon Steel – PI

PACKAGING SPECIFICATIONS

-Package is readied or dismantled only to the extent required for shipping
-All piping, instrument tubing and equipment will be adequately supported
-All flange and open ends of piping will be covered for shipment
-Load Out Line is 2” NPS Threaded non-code piping with 2” Threaded Ball Valve and Camlock.
-Heater Fuel Gas Supply 3/8” tubing to off skid, MAWP 150psig.